Technology · SRCP

One protocol for robots.

SRCP is a compact binary protocol designed from the ground up for robots. It replaces the patchwork of messaging, streaming, control and remote-access tools that robots usually need.

Everything over one connection

Six jobs, one protocol.

Publish / subscribe

Telemetry and events in a lightweight pub/sub model, in the spirit of MQTT.

Video streaming

Camera streams carried alongside everything else, in the spirit of RTSP/RTCP.

Real-time control

A dedicated low-latency control channel for remote driving.

Remote shell

Maintenance access to the robot without an open SSH port.

File transfer

Software, logs and data to and from the robot.

Liveness

Request/response heartbeats so both sides always know the link is alive.

Designed for where robots go

From a classroom Wi-Fi to a space link.

SRCP was designed for robots that work far from a data centre: behind mobile networks, on boats, in deserts and, one day, beyond Earth.

  • Outbound only. The robot opens a single connection to the broker. It never listens.
  • Lightweight. Small enough to run on microcontrollers: it already runs on an Arduino-class board.
  • Encryption per payload. Security is designed into each message rather than the transport, so messages can be carried over delayed or non-real-time links, such as IP over CCSDS space links.
  • Built to become a standard for the remote driving and control of robots.

Compared with a typical stack

One protocol instead of five.

JobTypical robot stackWith FRP
TelemetryMQTT broker and clientsSRCP
VideoRTSP server on the robotSRCP
Remote drivingWebRTC or a custom UDP linkSRCP
MaintenanceSSH with an open portSRCP
Network accessVPN, port forwarding, firewall rulesOne outbound connection

See FRP on your robots.

Tell us about your robots, your classroom or your mission. We will show you the platform end to end.