Platform · Digital Twin

In development

Real robot software. Virtual world.

The FRP Digital Twin runs your robot’s own software on its own computer, and connects it to a 3D world instead of real motors and cameras.

How it works

Swap the world, keep the robot.

Runs on the real robot

The robot software stays on the robot’s computer (Raspberry Pi 5 or NVIDIA Jetson class). Nothing is ported or rebuilt for simulation.

Virtual sensors and actuators

A hardware layer sends motor commands to the twin instead of the motors, and feeds the robot camera frames rendered from the 3D world.

Same commands, same protocol

Remote driving and every command that has an effect follow the real SRCP path, so operators practise exactly as in the field.

Why it matters

Test what you ship.

Simulators usually run a copy of the code on a workstation, with different timing, different libraries and different bugs. With the FRP Digital Twin, the software under test is the software that will drive the robot tomorrow.

  • Catch problems before they reach expensive hardware or a real site
  • Worlds built from real places: roads, urban areas, harbours, deserts and planetary terrain
  • Rehearse missions, collision avoidance and computer vision with a simulated camera
  • Physics and drive type (for example skid or Ackermann steering) defined from the robot’s 3D model
  • The safe training ground for Core-Edge Inheritance

Want early access to the Digital Twin?

We are building the Digital Twin with early partners in education and field robotics. Tell us about your use case.